|
The individual RoadBlade modules are 50.8cm/20 inches in length, 30cm/12 inches wide and have a profile of 44mm/1 3/4 inches. Modules are comprised of 356 T51 Aluminum, weighing 7.7kg/17 pounds. They are powder coated to resist corrosion.
The modules contain 5 stainless steel retractable blades, spaced 10cm/4 inches apart from one another when in the active position. The modules are 8.9cm/3 1/2 inches high when the blades are fully activated.
At the end of each module there are two ball connectors that connect to the previous modules' receptacles. This allows for modular construction and helps compensate for the crown in the road surface.
Underneath each module there are 5 tunnels that allow dirt, sand and other debris to fall through and wash away. Also on the bottom of each module are our new traction spikes. They are standard on the manual, DC portable and maximum security systems.
The traction spikes are removable and are designed to keep the modules in place on asphalt or dirt surfaces.On the surface of each module, there are four mounting holes that allow you to anchor the module to the ground surface.
7 individual modules, providing 3.65m/12 feet of perimeter protection, are included in each of the four RoadBlade packages.This can be easily extended by adding modules up to a maximum length of 7.62m/25 feet per system. The modules are constructed to withstand 50,000kg/50 tons of force enabling the RoadBlade tyre shredding system to handle heavy traffic volumes and heavy vehicles without damaging the modules.
The cut modules are included in the Permanent RoadBlade package. The ramps are cut off the modules so they can be installed flush with the road surface. |
Traction spikes are easily removed
and replaced.
Custom color options are available
for the modules.
(Additional fees may apply.)
Resulting tyre damage on a tractor trailor after passing over an active RoadBlade System | 