Directional Traffic Controlller

RoadBlade International, offers a variety of products to assist you with your specific security needs. In addition to our RoadBlade tyre shredders, a bi-directional tyre shredding system, we offer a directional spike system. Our directional tyre spikes, also known as one way tyre treadles, are used to control the flow of traffic in a single direction. In other words, vehicles may enter, but not exit. Some facilities require hard-stopping security systems such as wedge barriers or hydraulic bollards, to secure their gates and entrances. Our line of wedges, bollards, and more can assist you in customizing your physical security at your facility. If you do not find what you are looking for contact us and we will find it for you.

RB-36 or 36LD (Latching) Directional traffic controller
Surface Mount Application

The directional spike system is used to control traffic in one direction. Vehicle may enter, but not exit without severe tyre damage. Spring loaded spikes remain up and easily go down when vehicles pass over the system in the correct direction; however, if passing over it in the opposite (incorrect)  direction, all tyres will be sliced.

• Surface mounted spike system also serves as a
  speed bump to slow down the flow of traffic.
• Easily installed to the existing roadway.
• No excavating or asphalt cutting is required.
• Low profile for smooth passage.
• Fabricated in 91cm/3 Ft.sections to customize lane width.
• All welded construction.
• .635cm/1/4" thick hot rolled steel for "lasting durability".
• Color: Traffic safety red for easy visibility.

Click here for RB-36 specifications. (PDF)
Click here for RB-36LD specifications. (PDF)

RB-72 or 72LD(Latching) Directional traffic controller
Flush Mount Application

The flush mount directional spike system offers the same features as the surface mount; however, it is designed to sit flush with the road surface. This system is ideal for permanent installations.

• System is installed flush with the road surface
  for a low profile, allowing smooth passage.
• Easily installed to the existing or newly constructed
  roadway.
• Minimal excavating or asphalt cutting is required.
• Low profile for smooth passage.
• Fabricated in 1.82m/6 Ft.sections to customize lane width.
• All welded construction.
• .635cm/1/4" thick hot rolled steel for "lasting durability".
• Also available in a heavy duty system - Model RB-72HD
• Color: Traffic safety red for easy visibility.

Click here for RB-72 specifications
Click here for RB-72LD specifications